Chroma designs and manufactures five families of leading edge programmable AC power sources, precision power supplies, frequency converters and related instrumentation for simulating AC mains and line fault simulations conditions. Our AC Power Sources are used in automatic testing equipment and bench top applications including avionics testing, IEC testing, Mil-std-704 Avionics, DO-160 Shipboard testing and power supply test applications.
Besides functioning the same as the 61600 series, the 61500 AC power source is equipped with more features. It allows user to compose different harmonic components to synthesize your own harmonic distorted wave-shapes. The DC and AC+DC mode also extend the applications to simulate the natural waveform.
By using advanced DSP technology, 61500 AC power source offers precision, high speed power, and harmonics measurements up to 40 orders of current harmonics components.
It comes equip with powerful features such as:
|61511||Programmable AC Source 0~300V, 15~1.5kHz / 12KVA, 1 or 3ø|
|61512||Programmable AC Source 0~300V, 15~1.5kHz / 18KVA, 1 or 3ø|
The 61500 series defines a new standard of lower power AC power sources. Features included are power line disturbance simulation, programmable output impedance, comprehensive measurement functions and wave shape synthesis. Ideal for avionics and pre-compliance testing.More on this AC Source
|61501||Programmable AC Source 0~300V, 15~1kHz / 500VA, 1ø|
|61502||Programmable AC Source 0~300V, 15~1kHz / 1KVA, 1ø|
|61503||Programmable AC Source 0~300V, 15~1kHz / 1.5KVA, 1ø|
|61504||Programmable AC Source 0~300V, 15~1kHz / 2KVA, 1ø|
|61505||Programmable AC Source 0~300V, 15~1kHz / 4KVA, 1ø|
61600 series AC power source delivers pure, instrument grade AC and DC power at a very low cost. The power source generates very clean AC output with typical distortion less than 0.3-0.5%. With the power factor correction circuit, the source yields higher efficiency and delivers more output power. The DC and AC+DC mode extend the applications when users need DC voltage component for testing DC offset.
By using advanced DSP technology, 61600 AC power source offers precision and high speed power.
It comes equip with powerful features such as:
|61611||Programmable AC Source 0~300V, 15~1.5kHz / 12KVA, 1 or 3ø|
|61612||Programmable AC Source 0~300V, 15~1.5kHz / 18KVA, 1 or 3ø|
Chroma Programmable AC Power Source 61600 series delivers pure, instrument grade AC power at very low cost. The 61600 series supplies the output voltage from 0 to 300VAC, and frequency from 15 to 1000Hz. It is suitable for commercial, avionics, and military applications from bench-top testing to mass production.More on this AC Source
|61601||Programmable AC Source 0~300V, 15~1kHz / 500VA, 1ø|
|61602||Programmable AC Source 0~300V, 15~1kHz / 1KVA, 1ø|
|61603||Programmable AC Source 0~300V, 15~1kHz / 1.5KVA, 1ø|
|61604||Programmable AC Source 0~300V, 15~1kHz / 2KVA, 1ø|
|61605||Programmable AC Source 0~300V, 15~1kHz / 4KVA, 1ø|
Chroma's 61700 series are three phase AC sources targeted at power applications from 500VA per phase to 4KVA per phase. The instruments are programmable to 15 to 1200Hz and include the same low distortion/ high signal qualify as the 61500 and 61600 series. Optional transient generator allows for a wide variety of line disturbances including MIL-STD-704E (airborne) and DO-160 (shipboard).More on this AC Source
|61701||Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 1.5KVA|
|61702||Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 3KVA|
|61703||Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 4.5KVA|
|61704||Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 6KVA|
|61705||Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 12KVA|
Market demand for Distributed Resource (DR) products such as PV inverters and wind energy systems is steadily growing as the world strives for clean renewable energy sources. This demand has created a need for rigorous regulation testing to standards such IEEE 1547 / IEC 61000-3-15 / IEC 62116 ensuring proper and safe operation of on-grid products. It has become critical to manufacturers to conduct these tests to prove compliance and to relieve product liability concerns. Chroma’s new 61800 family of Grid Simulators has been designed to fulfill these test requirements by providing a full 4 quadrant, fully regenerative, grid simulator with advanced features for compliance, safety and product verification testing.More on this AC Source
|61845||Regenerative Grid Simulator 45kVA|
|61860||Regenerative Grid Simulator 60kVA|
|100447||Softpanel for 61800 Series|
The Chroma 6400 series Programmable AC Power Source uses state of the art PWM technology to deliver pure, instrument grade AC power at very low cost never achieved before. The 6400 AC power source offers maximum rated power for any output voltage from 0 to 300VAC, at any frequency from 45 to 1K Hz. It is not only suitable for commercial applications(47-63Hz), but also for avionics, marine, military applications at 400Hz.
All models generate very clean output with typical distortion less than 0.3%! Incorporating power factor correction circuit, the 6400 AC power source yields higher efficiency and delivers more output power than competitive instruments. It is capable of high peak repetitive current needed to drive most electronic products with high crest factor input design.
The 6400 AC power source uses advanced circuit to offer precision and high speed measurement of true RMS voltage, true RMS current, true power, frequency, power factor, and current crest factor.
Available CaptivATE software provides an Off-The-Shelf Electrical Safety Test Solution for accurately performing automated hipot, leakage current and functional tests. Testing is made simple and fast by automatically downloading the test setup, conducting the required measurements and outputting the test results.
|6404||AC Power Source 0-300V/45-500Hz/375VA|
|6408-1||AC Source 0-300V/45-500Hz/800VA (input rating 90-132V)|
|6408-2||AC Source 0-300V/45-500Hz/800VA (input rating 180-250V)|
|6415||AC Source 0-300V/45-1000Hz (1500VA)|
|6420||AC Source 0-300V/45-1000Hz (2000VA)|
|6430||AC Source 0-300V/45-1000Hz (3000VA)|
|6460-2||Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø, input 3Ø 220V|
|6460-3||Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø, input 3Ø 380V|
|6463-2||Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø or 3Ø Selectable, input 3Ø 220V|
|6463-3||Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø or 3Ø Selectable, input 3Ø 380V|
|6490-2||Programmable AC Source 0-300V/45-1000Hz (9000VA), output 1Ø or 3Ø Selectable, input 3Ø 220V|
|6490-3||Programmable AC Source 0-300V/45-1000Hz (9000VA), output 1Ø or 3Ø Selectable, input 3Ø 380V|
The global AC power testing requirements demand more sophisticated AC Power Source that is capable of simulating a wide variety of AC line conditions, harmonic waveforms, accurate power measurement and analysis. The Chroma 6500 series Programmable AC Power Source delivers the right solution to simulate all kinds of normal/abnormal input conditions and measure the critical characteristics of the product under test. It can be used for R&D design characterization, production testing, and QA verification of commercial, industrial, and aerospace electronic products.
The Chroma 6500 series delivers maximum rated power for any output voltage up to 300 Vac, and at any frequency between 15Hz to 2000Hz. It is suitable for commercial applications (47-63Hz); for avionics,marine, military applications at 400Hz or higher frequency; or for electrical motor, air-conditioner test applications at 20Hz. All models generate very clean sine or square waveforms output with typical distortion less than 0.5%.
The Chroma 6500 series has built-in Direct Digital Synthesis (DDS) Waveform Generator to provide user programmable high precision waveform. For testing products under AC line distortion conditions, clipped sinewave can be generated with 0% to 43% distortion and amplitude from 0% to 100%. It also can simulate all kinds of power line disturbances such as cycle dropout, transient spike, brown out, phase angle, voltage and frequency ramp up (ramp down), etc.. Up to 30 harmonic waveforms are factory installed, and testing for compliance to AC line harmonic immunity standards can be easily achieved in the field.
|6512||Programmable AC Source 0~300V/15~2KHz / 1.2KVA|
|6520||Programmable AC Source 0~300V/15~2KHz / 2KVA|
|6530||Programmable AC Source 0~300V/15~2KHz / 3KVA|
|6560-2||Programmable AC Source 0~500V/45~1KHz / 6KVA I/P3Ø 220V|
|6560-3||Programmable AC Source 0~500V/45~1KHz / 6KVA I/P3Ø 380V|
|6590-2||Programmable AC Source 0~300V/45~1KHz / 9KVA 1Ø or 3Ø, 3000VA per phase, I/P 3Ø 220V|
|6590-3||AC Power Source 0~300V/45~1KHz / 9KVA 1Ø or 3Ø, 3000VA per phase, I/P 3Ø 380V|
Our experienced sales engineers can help you select the right instrument for your application. Contact Chroma Systems Solutions today!
Subscribe now to get the latest information on our products and applications.