LiveZilla Live Help
Chroma Systems Solutions - World Leader in Power Test Instruments & Systems
Chroma Systems Solutions
DC Electronic Loads

DC Electronic Loads

DC Electronic Loads

Select DC Electronic Load

Chroma is the global leader in DC Electronic Load manufacturing. Used for power testing in all markets including automatic test systems, LED, power supply testing, battery testing, fuel cell testing, Chroma's electronic loads come standard with either USB or RS232 control and can be configured for GPIB (IEEE-488) control as well.

63600 Series Modular DC Electronic Load

63600 Series Modular DC Electronic Load

Chroma's 63600 Series DC Electronic Loads are designed for testing multi-output AC/DC power supplies, DC/DC converters, chargers, batteries, adapters, and power electronic components. Excellent for research, development, production, and incoming inspection applications. The 63600's state of the art design uses DSP technology to simulate non-linear loads using an unique CZ operation mode allowing realistic loading behavior. The 63600 series can draw its full rated current to almost zero volts. This unique feature guarantees the best loading performance for fuel cells and modern Point-of-Load devices.

More on this DC Load
Model Description Quote
63600-1 63600 Mainframe for Single Modules Request A Quote
63600-2 63600 Mainframe for up to 2 Modules Request A Quote
63600-5 63600 Mainframe for up to 5 Modules Request A Quote
63610-80-20 DC Load Module, 100W x 2/ 80V/ 20A Request A Quote
63630-80-60 DC Load Module, 300W/ 80V/ 60A Request A Quote
63640-80-80 DC Load Module, 400W/ 80V/ 80A Request A Quote
63630-600-15 DC Load Module, 300W/ 600V/ 15A Request A Quote

6310/A Series Modular DC Electronic Load

6310/A Series Modular DC Electronic Load

PLEASE NOTE: The 6310 has been renamed the 6310/A Series due to the addition of 6 New Features.

  • New Features - with no additional cost
  • Max Power: 200W, 100W×2(Dual), 30W & 250W, 300W, 600W, 1200W
  • Wide range 0~500V operating voltage
  • Up to 8 channels in one mainframe, fit for testing multiple output SMPS
  • Parallel load modules up to 1200W for high current and power application

New Features Added:

  • Constant Power (CP) Mode: Constant Power mode is ideal for battery capacity testing, battery life cycle testing, as well as output power versus efficiency curve testing.
  • Average Measurement: Due to certain UUTs having a low frequency output voltage ripple causing 6310 series measurements to fluctuate with the ripple, the 6310A series has included a new average measurement function to allow for a stable measurement from the DC Load.
  • Over Current Protection (OCP) and Over Power Protection (OPP) Test: The 6310A provides OCP and OPP testing with a dwell time setting to allow for OCP and OPP slew rate control, ideal for different OCP/OPP testing conditions.
  • Timing Measurement: Timing measurements for Battery and supercapacitor discharge time measurements.
  • Digital I/O Control: The digital I/O control is ideal for the automated testing environment. The 6310A can be controlled through the digital I/O and the load status obtained from the digital I/O signal.
  • USB Interface: Due to the wide spread use of the USB interface, 6310A provides the USB and GPIB interface as an optional interface, while RS-232 comes as standard.
  • NEW! 63110A LED Load Operating Instructions Demo
  • Download Data Sheet

The Chroma 6310A series Programmable DC Electronic Load is suitable for the test and evaluation of multi-output AC/DC power supplies, DC/DC converters, chargers, and power electronic components. It is ideal for applications in research and development, production, and incoming inspection. The system is configured by plugging the user selectable load modules into the system mainframe. The user interfaces include an ergonomically designed user friendly keypad on the front panel and the following computer interfaces: RS-232, USB or GPIB.

The 6310A series offers 8 types of modular loads with power ratings from 100 watts to 1,200 watts, current ratings from 0.5mA to 240A, and voltage ratings from 0.5mV to 500V. The loads can be operated in constant current, constant voltage, constant power and constant resistance and may be placed in parallel for increased current and power.

More on this DC Load
Model Description Quote
6312/A Mainframe for 2 Load Modules Request A Quote
6314/A Mainframe for 4 Load Modules Request A Quote
63101/A DC Load Module 40A/80V/200W Request A Quote
63102/A DC Load Module 20A/80V/100Wx2 channels Request A Quote
63103/A DC Load Module 60A/80V/300W Request A Quote
63105/A DC Load Module 10A/500V/300W Request A Quote
63106/A DC Load Module 120A/80V/600W Request A Quote
63107/A DC Load Module 4A & 40A/80V/30W & 250W Request A Quote
63108/A DC Load Module 20A/500V/600W Request A Quote
63110A NEW! LED Simulating DC Load Module, 2A/500V/100Wx2 Channels Request A Quote
63112/A DC Load Module 240A/80V/1200W Request A Quote
63113/A NEW! LED Simulating DC Load Module, 20A/300V/300W Request A Quote
63115/A NEW! LED Simulating DC Load Module, 20A/600V/300W Request A Quote
63123/A - 120 DC Load Module 70A/120V/350W Request A Quote

63200 Series HIGH POWER DC Electronic Load

63200 Series HIGH POWER DC Electronic Load
  • Power Rating: 2600W ~ 15600W
  • Voltage range: 0 ~ 80V / 0 ~ 600V / 0 ~ 1000V
  • Current range: Up to 1000A
  • CC, CR, CV, CP load modes
  • Master/Slave paralleling control mode
  • Dynamic loading : Up to 20kHz
  • Only need 1V to draw rated current
  • Programmable slew rate, up to 41A/µS
  • Download Data Sheet

The 63200 Series Electronic Loads are designed for DC Power Supply, power electronic devices and components testing. The high power rating, parallel and synchronization capabilities make them the ideal tool for testing the high power UUT such as SMR, UPS, battery, and fuel cell.

The 63200 series offers 10 different models with power range from 2600 watts to 15600 watts, current from 50A to 1000A and up to 600V input voltage. The 4 load modes setup provide different load simulations for various application occasions. The CC/CR modes are designed to test constant voltage type of power supply. CV mode is used to test battery charger and current source, while CP mode is ideal for battery testing by simulating the real discharge curve.

More on this DC Load
Model Description Quote
63201 DC Electronic Load 2.6KW/ 300A/ 80V Request A Quote
63202 DC Electronic Load 2.6KW/ 50A/ 500V Request A Quote
63203 DC Electronic Load 5.2KW/ 600A/ 80V Request A Quote
63204 DC Electronic Load 5.2KW/ 100A/ 600V Request A Quote
63205 DC Electronic Load 6.5KW/ 180A/ 80V Request A Quote
63206 DC Electronic Load 10.4KW/ 600A/ 80V Request A Quote
63207 DC Electronic Load 10.4KW/ 300A/ 80V Request A Quote
63208 DC Electronic Load 15.6KW/ 600A/ 80V Request A Quote
63209 DC Electronic Load 15.6KW/ 1000A/ 80V Request A Quote
63210 DC Electronic Load 14.5KW/ 150A/ 600V Request A Quote
63211 High Power DC Load 15.6kW/ 150A/ 1000V Request A Quote
63212 DC Electronic Load 10KW/ 150A/ 1000V Request A Quote

Expert Information

Free quote from Chroma

Our experienced sales engineers can help you select the right instrument for your application. Contact Chroma Systems Solutions today!

Subscribe now to get the latest information on our products and applications.

DC Loads Product Video

Aerospace/Military Applications

Aerospace/Military Applications
  • Aerospace/Military Applications
    Military Spec Power Supply's and Converters require the utmost in quality and reliability. For Military standards such as MIL-STD-461, MIL-STD-704, MIL-STD-810.

LED/Lighting Applications

LED/Lighting Applications
  • LED/Lighting Applications
    The industry's first LED simulator for LED driver testing. The LED's forward voltage and operating resistance can be set to further adjust the loading and ripple current to better simulate LED characteristics.

Solar Applications

Solar Applications
  • Solar Applications
    Photovoltaic array and string testing with Chroma's Electronic Loads. The most important characteristic of the PV panel is its I-V curve.

DC Power Supplies

DC Power Supplies
  • A New Standard for High Accuracy Programmable DC Supplies
    Chroma's new 62000P Programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantage include a constant power operating envelope, precision read back of output current and voltage, output trigger signals as well as the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations. The 62000P Series includes 9 different models ranging from 600W to 5000W, up to 120A and up to 600V.

AC Electronic Loads

AC Electronic Loads

Call (949) 600-6400 to get your free quote now!
Contact our experienced sales engineers now!
Follow Chroma Systems Solutions on: facebook twitter youtube Chroma Blog