17020 Regenerative Battery Pack Test System
- Regenerative Battery Energy Discharge
- Energy saving
- Environment protection
- Low heat output
- Charge / discharge mode
- Constant Current
- Constant Voltage
- Constant Power
- Channels paralleled for higher Currents
- Thermal Chamber Control
- Battery module / pack surface temperature monitoring
- Data recovery protection (after power failure)
- Total harmonic distortion: less than 5% of rated power
The Chroma 17020 System is a high precision integrated solution specifically designed for secondary battery module and pack tests. Accurate source and measurement ensure the test quality that is suitable for performing exact, reliable testing crucial for battery module / pack incoming or outgoing inspection as well as capacity, performance, production and qualification testing.
The system architecture offers regenerative discharge energy design to recycle the electric energy sourced by the battery module / pack to channels in the system performing a charging function or back to the utility mains in the most energy efficient manner. This feature saves electricity, reduces the facilities thermal foot print and provides a green solution by reducing the environmental impact on our planet.
It is equipped with multiple independent channels, to support dedicated charge / discharge tests on multiple battery modules / packs each with discrete test characteristics. Channels may be easily paralleled to support higher current requirements. This feature provides the ultimate flexibility between high channel count and high current testing.
Advanced driving hardware can create seamless transitions between a maximum charge to maximum discharge (or maximum discharge to maximum charge) with a rapid 10mS conversion. This feature allows for charge/discharge modes simulating real world scenarios.
The Chroma 17020 ATS has flexible programming functions that can be operated with Chroma’s powerful “Battery Pro” Software (pictured below). Battery Pro utilizes the system to create cycling tests from basic charge or discharge to complex drive cycle testing for each channel or channel groups. Thermal chamber control can be integrated into a profile and triggered by time or test results yielding a dynamic profile. Battery Pro’s features allow quick and intuitive test development eliminating the need of tedious scripting or programming by a software engineer.
Multiple safety features are standard including Battery Polarity Check, Over Voltage Protection, Over Current Protection check and Over Temperature Protection to ensure protected charge / discharge testing. In the unlikely event of power or computer communication loss, data is securely stored in system non-volatile memory protecting against potential data loss and allowing for continuous flow after restart.
Green products should always apply the concept of environmentally friendly for production and testing. The 17020 system power regenerative architecture is able to recycle the discharged battery power to mains or to transfer it to the battery needs to be charged to solve the discharge energy wasting problem. It not only brings huge economic effect to the user by resolving the workspace heat treatment problem but also meets the carbon reduction and environmental protection requirements. The system provides a real environment-friendly battery test for testing the electric motorcycles and electric bicycles.
Application Areas & Industries:
- Power battery pack learning test
- Cycle life test
- Battery pack endurance test
- Battery pack capacity test
- Battery pack reliability test
- EV battery module
- Electric scooter/bike
- Electric gardening tools
- Energy storage battery
- Power tools
|17020||Regenerative Battery Pack ATS|
17011 Programmable Charge/Discharge Tester
High-accuracy; Linear circuit design, low ripple current; Independent channels; CC/CV/CP charge, discharge
17030 Regenerative Battery Pack Test System
Regenerative battery energy discharge; Channels can be parallelled for higher currents; Charge/discharge mode