Exploring Battery Simulator

Battery Simulator-Chroma A170202

Battery Simulator

Chroma A170202

Validate your battery-connected devices more efficiently and with more accuracy with this battery simulator

Highly Accurate, Dynamic Battery Simulation

Testing battery-connected devices with an actual battery can be cost or time prohibitive, especially if multiple channels are required. Our Battery Simulation software is used to validate device functions during development instead of an actual battery or batteries. Automotive applications include motor drivers, OBC, DC-DC convertors or chargers, and products along the DC bus.

Key Features

  • Multichannel battery packs state simulation.
  • Follow the battery cell curve behavior to simulate battery state.
  • Able to set frequently used parameters for battery pack and rapidly customize initial output state.
  • Regenerative battery energy discharge function, power saving, environment-friendly and low heat output with 85% efficiency.
  • Up to 60 channels can be paralleled for large current request.
  • Operating mode: Constant Current/Constant Voltage/Constant Power discharge - 600W, 1.25kW, 2.5kW, 5kW,10kW, 20kW, 30kW, 50kW, 60kW power per channel - 20V, 60V, 100V, 200V and 500V voltage modules - 2600A maximum current (paralleled)
  • Dynamic current charge and discharge simulation.
  • Highly accurate current and voltage measurement.
  • Smooth and rapid current charge and discharge switching without interruption.
  • Current smooth without surge when altering charge and discharge mode (CC-CV-CP).
  • Independent channel protection function.

How to select the battery simulator or DC power supply and DC load integrated solution?

The integrated solution of DC power supply and DC load can also form a battery simulator; however, the difference between it and the bidirectional power supply is if there is delay during conversion. It is suggested to use the 17020 to test the bidirectional products, and use the 17020 or DC power supply and DC load integrated solution for testing the unidirectional products.

17020 DC Source/DC Load
Power Rating
>20kW
<20kW
Voltage Rating
20V, 60V, 100V, 200V, 500V
Source:30V, 40V, 80V, 100V, 300V, 450V, 600V,1000V Load?150V, 600V, 1200V
V Ripple Noise (rms)
<1%FS (Base on Voltage range)
8mV~1500mV (Base on Voltage range)
I Ripple Noise (rms)
<1%FS (Base on Current range)
10 mA~270mA (Base on Current range)
Interrupt during current transition
W/O Interrupt
Interrupt during charge / discharge switch
Battery Simulator Software
Ready by Chroma
Create by user
Multi-UUT
Max 8 channels / Min 1 Channels
1 Channels
Dual-Output
2 DC output per-channel
1 DC output per-channel

Watch

Play Video

EV and Battery Test Solutions

Provides an overview of Chroma solutions for Electric Vehicle and Battery test products and capabilities.

Related Products

Regenerative Battery Pack Test System

Chroma 17020

20V/ 60V/ 100V/ 200V/ 500V

65A/ 13A/ 62.5A/ 50A/ 30A

1.25kW/ 600W/ 2.5kW

Designed for secondary battery modules and pack tests, with accurate sources and measurements suitable for performing repetitive and reliable tests.

Regenerative Battery Pack Test System

Chroma 17040

60kW/ 120kW/ 180kW/ 250kW/ 300kW

60~1000V

±0.1%FS

With an Energy Regenerative Function to reduce power consumption during discharge, ensuring a stable power grid without generating harmonic pollution on other devices.

Regenerative Battery Pack Test System

Chroma 17040E

100kW*14, 200kW, 200kW*14, 300kW*14

5~850V, 100~1700V

0.1%F.S.

High-power battery test system up to 1700V/4800A/1.2MW with regenerative capabilities, dynamic profile simulation, and advanced safety features.

Regenerative Battery Pack Test System

Chroma 17020E

10kW / 20kW / 30kW / 40kW / 50kW / 60kW / 70kW / 80kW per channel

60V / 100V / 200V

100A / 200A / 300A / 400A / 500A / 600A / 700A / 800A per channel

High precision system specifically designed for secondary battery module and pack testing