Blog


05

Jun 2017

63600 User Defined Waveforms (UDW) with Parallel Loads

63600 User Defined Waveforms (UDW) with Parallel Loads One time registration required in order to download documents. Register or login to continue. 1,073 KB 111 downloads Chroma 63600 Loads can be paralleled to achieve higher current or power, and still share the same User Defined Waveforms. This App Note describes how to set up the 63600 Loads in Parallel and how to share...


10

May 2016

63600 Sinewave Dynamic VBA Program example

This document describes programming the Chroma 63600 DC Electronic loads for creating a Sinewave Dynamic Load using Visual Basic Application (VBA) software with GPIB and SCPI commands. By adding a Sinewave current to a DC current level for testing the Effects of Dynamic loading at various frequencies on Power supplies, or to test the Internal Resistance of Batteries, and Fuel cells.


12

Aug 2014

63600 Sine Wave Dynamic Parallel

63600 Sine Wave Dynamic Parallel One time registration required in order to download documents. Register or login to continue. 127 KB 435 downloads This Application Note will show the manual steps to set the load for Sine Wave Dynamic and show a list of the SCPI commands used to program the Sine Wave Dynamic load. See also the 63600 Sinewave Dynamic...


12

Aug 2014

63600 Confirm Ripple Current

63600 Confirm Ripple Current One time registration required in order to download documents. Register or login to continue. 103 KB 357 downloads This application note will show the proper way to measure the actual ripple current from the load at the lowest levels. ...


12

Aug 2014

63600 DC Load Ethernet Connection

63600 DC Load Ethernet Connection One time registration required in order to download documents. Register or login to continue. 1.16 MB 625 downloads This application note describes how to configure the ethernet connection of a 63600 DC Load. ...


12

Aug 2014

63600 Minimum Operating Voltage

63600 Minimum Operating Voltage One time registration required in order to download documents. Register or login to continue. 145 KB 375 downloads This application note describes how to determine the minimum voltage in each operating range. ...


12

Aug 2014

63600 Selecting Electronic Loads For Low Voltage High Current Applications

63600 Selecting Electronic Loads For Low Voltage High Current Applications One time registration required in order to download documents. Register or login to continue. 749 KB 454 downloads This application note provides design equations that can be used to assess the capability of an electronic load to sustain a maximum current at a minimum voltage in light of overall system resistance characteristics. ...


12

Aug 2014

63600 Digitizing Measurements

63600 Digitizing Measurements One time registration required in order to download documents. Register or login to continue. 240 KB 573 downloads Dynamic Loading and Transient Response testing is a common test requirement for Power Supplies, DC DC Converters and Battery Chargers. Dynamic and Dynamic Sweep tests are used to confirm the response times...


12

Aug 2014

63200 Firmware Update

63200 Firmware Update One time registration required in order to download documents. Register or login to continue. 547 KB 464 downloads Chroma 63200 series electronic loads can be brought up to date by updating firmware when no hardware change has been made. ADLS software is required to do firmware update. ...


12

Aug 2014

6310A Slew Rate And Minimum Rise Time

6310A Slew Rate And Minimum Rise Time One time registration required in order to download documents. Register or login to continue. 128 KB 675 downloads The purpose of this Application Note is to explain how the Slew Rate Control operates using the 6310A series loads. ...