Exploring 100Hz-50kHz LCR Meter
100Hz-50kHz LCR Meter
Chroma 11021/11021-L
For use in both component evaluation on the production line and fundamental impedance testing for bench-top applications
Test Levels
0.25V / 1V (11021)
50mV / 1V (11021-L)
Basic Accuracy
0.1% (11021)
0.2% (11021-L)
Measurement Time
75mS
The Chroma 11021/11021-L are the most cost-effective digital LCR Meters, providing 100Hz, 120Hz, 1kHz, and 10kHz test frequencies for the 11021 and 1kHz, 10kHz, 40kHz, 50kHz test frequencies for the 11021-L. Standard RS232 interface, optional GPIB & Handler interface, high speed and stable measurement capabilities enable the Chroma 11021/11021-L can be used for both component evaluation on the production line and fundamental impedance testing for bench-top applications.
Bin-sorting Function
The 11021/11021-L provide an 8-bin sorting function with bin count statistics. The bin count statistics can be used for analysis distribution of test results or production quality.
HI/GO/LO Comparator
The 11021/11021-L meters have a comparator function to judge HI/GO/LOW of capacitance measurement results, and to judge GO/NG of D factor, and an alarming beeper for total GO/NG judgements.
Lower Harmonic-distortion Phase-detection Technology
The 11021/11021-L meters use lower harmonic-distortion phase detection technologies to reduce affection of measurement accuracy caused by hysteresis distortion in magnetic component or high dielectric-coefficient capacitor measurement, which is not provided in general low-end LCR meters.
Programmable
Trigger Delay Time
PASS/FAIL Alarming
Beeper Function
User-Friendly
Interface
Optional GPIB &
Handler Interface
Watch
LCR Meters: Selecting Precision Equipment for Low, Mid, and High Frequency Impedance Measurements
This seminar covers Chroma LCR test instruments that not only analyze the characteristics of components but also help to optimize the entire application process including automated manufacturing assessment, incoming and outgoing material inspection, quality verification, and R&D analysis in order to meet low cost, high efficiency requirements.
Related Products
100Hz-50kHz LCR Meter
Chroma 11021/11021-L
0.25V / 1V (11021)
50mV / 1V (11021-L)
0.1% (11021)
0.2% (11021-L)
75mS
For use in both component evaluation on the production line and fundamental impedance testing for bench-top applications
50Hz-100kHz LCR Meter
Chroma 11022/11025
10mV~1V , step 10mV
0.1%
21mS
Programmable test signal level settings are from 10mV to 1V in steps of 10mV, and the VM/IM signal level monitor functions allow you to evaluate your devices at the level you specify
Capacitor Leakage Current/IR Meter
Chroma 11200
1.0~100V, step 0.1V: 101~650V
or 800V, step 1V
0.3%
77mS~420mS
Used for both component evaluation on the production line and fundamental leakage current or IR testing for bench-top applications
High Frequency LCR Meters up to 30MHz
Chroma 11050 / 11050-5M / 11050-30M
10mV~5V
0.1%
15mS~295mS
Measurement capabilities cover the primary and secondary parameters required for testing the inductance, capacitance, resistance, quality factor and loss factor of passive components