Provides high current testing of ground continuity between chassis and power cord ground on a wide variety of electrical products and appliances

Designed for hipot tests and analysis of transformers, motors and other electronic components

Measure the hipot leakage current of all channels at the same time and conduct tests on up to 100 DUTs simultaneously This multi-channel hipot tester scales from 10 channels to 100 by master slave linking up to 10 units, with AC output from 0.05kV to 6kV and DC from 0.05kV to 8kV.

Specifically designed to test winding components using a high-voltage charged micro capacitor and the coil under test, forming an RLC parallel resonant circuit. As an impulse winding tester, the 19305 compares the resulting ringing waveform against a golden sample to expose layer shorts, corona and partial discharge that a hipot test alone will not catch.

Specifically designed for wound component tests, utilizes a high voltage & low capacitance capacitor (low test energy) in parallel with a coil to form an RLC resonant As a power inductor impulse winding tester, the 19301A resolves the fast ringing waveform of low inductance parts at a 200MHz sampling rate, making it the impulse winding tester of choice for power inductors below 100uH.

Impulse winding test imposes a non-destructive, high speed and low energy voltage impulse on the device under test for analysis and comparison. As a wound component safety test analyzer, the Chroma 19036 combines that impulse winding test with AC/DC hipot, IR and DC resistance measurement in one wound component EST instrument.